Product Description
Please check Corrosion Information if it is suitable for your application.
Material
Carbon Steel 2mm thick
Finish
Z275 Galvanised
Features & Benefits
- Manufactured in heavier gauge steel for a stronger load capacity
- Big seat for joists provides greater strength support
- Quick and simple installation
- May be fastened to the header material with either nails or bolts
- Can be installed on solid timber header, I-Beam or concrete/masonry wall
- Compatible with Strong-Drive® SD screws
Installation
- Use all specified fasteners
- Verify that the header can take the fasteners specified in the table
- SAE hangers can be installed by filling all round holes, or all bolt holes, with the specified fasteners. A combination of the two would not give any increase to the performance values
- The hangers have bolt holes for 10mm or 12mm fasteners into the face
- The timber bolted capacity to be determined according to the relevant standards. Do not exceed the load values given in the table
- The hanger depth is to be at least 60% of the carried member depth to prevent rotation, unless additional lateral restraint is added to the top of the carried member
Please view the Simpson Strong-Tie Website, Installation Guide or the Technical Data
