Product Description
The SDE Split Joist Hanger is a two‑piece, width‑adjustable joist hanger that can accommodate joist widths from 60mm and 120mm. Each SDE is comprised of one left and one right piece. It is essential to install nails in the base of the joist hanger to ensure a solid assembly.
Please check Corrosion Information if it is suitable for your application.
Material
Carbon Steel 2mm thick
Finish
Z275 Galvanised
Features & Benefits
- Manufactured in heavier gauge steel for a stronger load capacity
- One joist hanger with adjustable width can handle multiple applications, simplifying purchasing
- Quick and simple installation
- The hangers have bolt holes for 10mm or 12mm fasteners into the face
- Can be installed on solid timber header, I-Beam or concrete/masonry wall
- Compatible with Strong-Drive® SD screws
Installation
- Use all specified fasteners
- Verify that the beam/header can take the fasteners specified in the table
- Each SDE piece must also be nailed through the holes underneath the joist
- The hangers have bolt holes for 12mm fasteners into the face
- The timber bolted capacity to be determined according to the relevant standards. Do not exceed the load values given in the table
- The hanger depth is to be at least 60% of the carried member depth to prevent rotation, unless additional lateral restraint is added to the top of the carried member
- These hangers cannot be skewed
Please view the Simpson Strong-Tie Website, the Product Brochure, Installation Guide or the Technical Data
